( roundover_edge )
( File created: Monday May 23 2016 - 04:29 PM)
( for CNC Shark from Vectric )
( Material Size)
( X= 9.000, Y= 9.000, Z= 0.500)
( Z Origin for Material  = Material Surface)
( XY Origin for Material = Center)
(      XY Origin Position  = X:0.000, Y:0.000)
( Home Position)
(  X =  X0.0000 Y =  Y0.0000 Z =  Z0.5000)
( Safe Z = 0.250)
()
(Toolpaths used in this file:)
(Quick Engrave 1)
(Tools used in this file: )
(1 = V-Bit {60 deg 0.25"})
(V-Bit {60 deg 0.25"})
(|---------------------------------------)
(| Toolpath:- 'Quick Engrave 1'    )
(|---------------------------------------)
G90
G20
F100.0
G64 P.01
S 2000
M3
G0  Z0.5000
F100.0
G00 X-4.0447 Y-4.0342 Z0.2500
F100.0
G00 X-4.0447 Y-4.0342 Z0.1250
F30.0
G1 X-4.0447 Y-4.0342 Z-0.1250
F100.0
G01 X-4.0447 Y4.0658 Z-0.1250
G01 X4.0553 Y4.0658 Z-0.1250
G01 X4.0553 Y-4.0342 Z-0.1250
G01 X-4.0447 Y-4.0342 Z-0.1250
F30.0
G1 X-4.0447 Y-4.0342 Z-0.2500
F100.0
G01 X-4.0447 Y4.0658 Z-0.2500
G01 X4.0553 Y4.0658 Z-0.2500
G01 X4.0553 Y-4.0342 Z-0.2500
G01 X-4.0447 Y-4.0342 Z-0.2500
F100.0
G00 X-4.0447 Y-4.0342 Z0.2500
G00  Z0.5000
G00  X0.0000  Y0.0000
M02