( select switch Drill Key-5 )
( File created: Monday October 25 2021 - 03:35 PM)
( for CNC Shark from Vectric )
( Material Size)
( X= 400.000, Y= 600.000, Z= 45.000)
( Z Origin for Material  = Material Surface)
( XY Origin for Material = Center)
(      XY Origin Position  = X:0.000, Y:0.000)
( Home Position)
(  X =  X0.000 Y =  Y0.000 Z =  Z10.000)
( Safe Z = 5.000)
()
(Toolpaths used in this file:)
(Drill Key-5)
(Tool used in this file: )
(End Mill {0.125 inch})
(|---------------------------------------)
(| Toolpath:- 'Drill Key-5'    )
(|---------------------------------------)
G90
G21
F1270.0
G64 P2.54
S 2000
M3
G0  Z10.000
F1270.0
G00 X93.115 Y-45.029 Z5.000
F508.0
G1 X93.115 Y-45.029 Z-2.500
F1270.0
G00 X93.115 Y-45.029 Z5.000
F508.0
G1 X93.115 Y-45.029 Z-5.000
F1270.0
G00 X93.115 Y-45.029 Z5.000
F508.0
G1 X93.115 Y-45.029 Z-7.500
F1270.0
G00 X93.115 Y-45.029 Z5.000
F508.0
G1 X93.115 Y-45.029 Z-10.000
F1270.0
G00 X93.115 Y-45.029 Z5.000
F1270.0
G00 X114.916 Y-79.753 Z5.000
F508.0
G1 X114.916 Y-79.753 Z-2.500
F1270.0
G00 X114.916 Y-79.753 Z5.000
F508.0
G1 X114.916 Y-79.753 Z-5.000
F1270.0
G00 X114.916 Y-79.753 Z5.000
F508.0
G1 X114.916 Y-79.753 Z-7.500
F1270.0
G00 X114.916 Y-79.753 Z5.000
F508.0
G1 X114.916 Y-79.753 Z-10.000
F1270.0
G00 X114.916 Y-79.753 Z5.000
G00  Z10.000
G00  X0.000  Y0.000
M02