( step7_truss_slot )
( File created: Sunday February 14 2016 - 11:09 PM)
( for CNC Shark from Vectric )
( Material Size)
( X= 5.500, Y= 32.000, Z= 0.750)
( Z Origin for Material  = Material Surface)
( XY Origin for Material = Center)
(      XY Origin Position  = X:0.000, Y:0.000)
( Home Position)
(  X =  X0.0000 Y =  Y0.0000 Z =  Z1.0010)
( Safe Z = 1.000)
()
(Toolpaths used in this file:)
(hot rod truss rod slot from front)
(hot rod slot add-in)
(Tools used in this file: )
(1 = Down-Cut Bit 0.248)
(Down-Cut Bit 0.248)
(|---------------------------------------)
(| Toolpath:- 'hot rod truss rod slot from front'    )
(|---------------------------------------)
G90
G20
F42.0
G64 P.01
S 2000
M3
G0  Z1.0010
F42.0
G00 X0.0454 Y-11.8283 Z1.0000
F36.0
G1 X0.0454 Y-11.8283 Z-0.1200
F42.0
G01 X0.0206 Y6.0250 Z-0.1200
F42.0
G00 X0.0206 Y6.0250 Z1.0000
F42.0
G00 X0.0454 Y-11.8283 Z1.0000
F36.0
G1 X0.0454 Y-11.8283 Z-0.2400
F42.0
G01 X0.0206 Y6.0250 Z-0.2400
F42.0
G00 X0.0206 Y6.0250 Z1.0000
F42.0
G00 X0.0454 Y-11.8283 Z1.0000
F36.0
G1 X0.0454 Y-11.8283 Z-0.3600
F42.0
G01 X0.0206 Y6.0250 Z-0.3600
F42.0
G00 X0.0206 Y6.0250 Z1.0000
F42.0
G00 X0.0454 Y-11.8283 Z1.0000
F36.0
G1 X0.0454 Y-11.8283 Z-0.4800
F42.0
G01 X0.0206 Y6.0250 Z-0.4800
F42.0
G00 X0.0206 Y6.0250 Z1.0000
(|---------------------------------------)
(| Toolpath:- 'hot rod slot add-in'     )
(|---------------------------------------)
F42.0
G00 X-0.0441 Y5.0415 Z1.0000
F36.0
G1 X-0.0441 Y5.0415 Z-0.1120
F42.0
G01 X0.0829 Y5.0417 Z-0.1120
G01 X0.0818 Y6.1446 Z-0.1120
G01 X-0.0452 Y6.1444 Z-0.1120
G01 X-0.0441 Y5.0415 Z-0.1120
F36.0
G1 X-0.0441 Y5.0415 Z-0.2240
F42.0
G01 X0.0829 Y5.0417 Z-0.2240
G01 X0.0818 Y6.1446 Z-0.2240
G01 X-0.0452 Y6.1444 Z-0.2240
G01 X-0.0441 Y5.0415 Z-0.2240
F36.0
G1 X-0.0441 Y5.0415 Z-0.3360
F42.0
G01 X0.0829 Y5.0417 Z-0.3360
G01 X0.0818 Y6.1446 Z-0.3360
G01 X-0.0452 Y6.1444 Z-0.3360
G01 X-0.0441 Y5.0415 Z-0.3360
F36.0
G1 X-0.0441 Y5.0415 Z-0.4480
F42.0
G01 X0.0829 Y5.0417 Z-0.4480
G01 X0.0818 Y6.1446 Z-0.4480
G01 X-0.0452 Y6.1444 Z-0.4480
G01 X-0.0441 Y5.0415 Z-0.4480
F36.0
G1 X-0.0441 Y5.0415 Z-0.5600
F42.0
G01 X0.0829 Y5.0417 Z-0.5600
G01 X0.0818 Y6.1446 Z-0.5600
G01 X-0.0452 Y6.1444 Z-0.5600
G01 X-0.0441 Y5.0415 Z-0.5600
F42.0
G00 X-0.0441 Y5.0415 Z1.0000
G00  Z1.0010
G00  X0.0000  Y0.0000
M02